Honda Insight 2000-2006

Oil Pressure Switch

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section. Also see the IMA system disabling before proceeding with any procedure.
  2.  
  3. Remove the throttle body, as outlined in the Fuel System Section.
  4.  
  5. Disconnect the oil pressure switch connector, then remove the oil pressure switch.
  6.  
  7. Remove any old liquid gasket from the switch and switch mounting hole.

    Click image to see an enlarged view

    Fig. Engine oil pressure switch location

  8.  

To install:

  1. Apply a very small amount of liquid gasket to the new oil pressure switch threads, then install the oil pressure switch. Tighten the switch to 13 ft. lbs. (18 Nm).
    WARNING
    Using too much liquid gasket may cause liquid gasket to enter the oil passage or the end of the new oil pressure switch.

  2.  
  3. Install the throttle body.
  4.  

 
label.common.footer.alt.autozoneLogo