Exhaust Manifold


Removal & Installation

J35a1 And J35a4 Engines
  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  3. Remove or disconnect the following:

    Negative battery cable
    Exhaust manifold heat shield
    Heated Oxygen Sensor (HO 2 S) connector
    Exhaust front pipe
    Exhaust manifold bracket, if equipped
    Exhaust manifold


To install:

  1. Install or connect the following:

    Exhaust manifold. Tighten the fasteners to 23 ft. lbs. (31 Nm).
    Exhaust manifold bracket, if equipped. Tighten the bolts to 33 ft. lbs. (44 Nm).
    Exhaust front pipe. Tighten the nuts to 40 ft. lbs. (55 Nm).
    HO 2 S connector
    Exhaust manifold heat shield
    Negative battery cable

    Click image to see an enlarged view

    Fig. Exploded view of the exhaust manifolds-J35A1 and J35A4 engines