Honda_Odyssey_2001-2006

Rear Main Seal

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2.  
  3. Remove or disconnect the following:

    Transaxle
     
    Clutch pressure plate and disc, if equipped
     
    Flywheel
     
    Oil seal
     

  4.  

To install:

Click image to see an enlarged view

Fig. Rear seal installation

  1. Install or connect the following:

    Oil seal. Drive the seal square into the seal case.
     
    Flywheel. Tighten the bolts in a crossing pattern to 54 ft. lbs. (73 Nm).
     
    Clutch pressure plate and disc, if equipped
     
    Transaxle
     

  2.  
  3. Check the fluid levels.
  4.  
  5. Start the engine and check for leaks.
  6.  

 
label.common.footer.alt.autozoneLogo