Honda_Odyssey_2001-2006

Fuel Pump

Print

Removal & Installation



2001-04 Models
  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2.  
  3. Relieve the fuel system pressure.
  4.  
  5. Remove or disconnect the following:

    Negative battery cable
     
    Rear seats and carpet
     
    Access panel
     
    Fuel pump module wiring connector
     
    Fuel supply and return lines
     
    Fuel pump locknut using wrench 07XAA-001010A as shown in the accompanying illustration.
     
    Fuel pump module
     

  6.  

To install:

  1. Install or connect the following:

    Fuel pump module. Use a new seal and align the matchmarks.
     
    Fuel pump locknut and tighten to 69 ft. lbs. (93 Nm) using wrench 07XAA-001010A
     
    Fuel supply and return lines
     
    Fuel pump module wiring connector
     
    Access panel
     
    Rear seats and carpet
     
    Negative battery cable
     

  2.  
  3. Start the engine and check for leaks.
  4.  

2005-06 Models

See the procedure under Fuel Filter.

 
label.common.footer.alt.autozoneLogo