Honda_Odyssey_2001-2006

Wheel Bearings

Print

Adjustment



The wheel bearings are sealed units and are not adjustable.

Removal & Installation



2001-04 Models


Click image to see an enlarged view

Fig. Exploded view of the rear hub/bearing assembly-2001-04 models

  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2.  
  3. Remove or disconnect the following:

    Rear wheel
     
    Brake caliper and rotor
     
    Spindle cap, nut and washer
     
    Hub and bearing assembly
     

  4.  

To install:


NOTE
Use a new spindle nut for assembly.

  1. Install or connect the following:

    Hub and bearing assembly. Tighten the spindle nut to 181 ft. lbs. (245 Nm).
     
    Spindle cap
     
    Brake caliper and rotor. Tighten the caliper bracket bolts to 28 ft. lbs. (38 Nm).
     
    Rear wheel
     

  2.  

2005-06 Models

See the procedure under Knuckle Removal and Installation.

 
label.common.footer.alt.autozoneLogo