Honda_Passport_1997-2002

Rear Main Seal

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove or disconnect the following:
    NOTE
    Do not damage the crankshaft sealing surface.



    Negative battery cable
     
    Transmission
     
    Clutch assembly, if equipped with a manual transmission
     
    Flywheel by loosening the flywheel bolts in a 2-step crisscross sequence
     
    Rear main seal, using a seal puller
     

  4.  

To install:

Click image to see an enlarged view

Fig. Installing a one-piece rear crankshaft oil seal

  1. Install or connect the following:

    New rear main seal, by lubricating it with engine oil
     
    Flywheel, using new flywheel bolts. Tighten the bolts, in a 2-step crisscross pattern, to 40 ft. lbs. (54 Nm).
     
    Clutch assembly, if removed
     
    Transmission
     
    Negative battery cable
     

  2.  
  3. Check the oil and refill as necessary.
  4.  

 
label.common.footer.alt.autozoneLogo