Honda_Passport_1997-2002

Shock Absorbers

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Support the lower control arm with a jackstand.
  4.  
  5. Remove or disconnect the following:

    Front wheels
     
    Upper shock retaining nut and rubber bushing
     
    Suspension bump stops
     
    Lower nut
     
    Shock absorber

    Click image to see an enlarged view

    Fig. Front shock absorber mounting

     

  6.  

To install:

  1. Install or connect the following:

    Shock absorber. Tighten the lower bolt to 60-61 ft. lbs. (82-84 Nm).
     
    Bump stop. Tighten the bolts to 30 ft. lbs. (41 Nm).
     
    Upper shock retaining nut and rubber bushing. Tighten the nut to 14-15 ft. lbs. (19-20 Nm).
     
    Front wheels
     

  2.  

 
label.common.footer.alt.autozoneLogo