Honda_Passport_1997-2002

Removal & Installation

Print

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Disable the air bag system.
  4.  
  5. Remove or disconnect the following:

    Skid plates
     
    Lower fan shroud
     
    Stabilizer bar
     
    Power steering pressure and return lines
     
    Pitman arm
     
    Steering column intermediate shaft
     
    Steering gear
     

  6.  

To install:

  1. Install or connect the following:

    Steering gear. Tighten the bolts to 33 ft. lbs. (44 Nm).
     
    Steering column intermediate shaft. Tighten the pinch bolt to 18 ft. lbs. (25 Nm).
     
    Pitman arm. Tighten the nut to 159 ft. lbs. (216 Nm).
     
    Power steering pressure and return lines. Tighten the fittings to 33 ft. lbs. (44 Nm).
     
    Stabilizer bar
     
    Lower fan shroud
     
    Skid plates
     

  2.  
  3. Fill the power steering fluid reservoir.
  4.  
  5. Check the wheel alignment and adjust as necessary.
  6.  

 
label.common.footer.alt.autozoneLogo