Honda_Passport_1997-2002

Removal & Installation

Print

  1. Remove the drive belt. Refer to the Engine Mechanical Section for details.
  2.  
  3. Place a drain pan below the pump.
  4.  
  5. Disconnect the suction hose.
  6.  
  7. Disconnect the flexible hose.
  8.  
  9. Remove the power steering fixing bolt and remove the pump assembly.

    Click image to see an enlarged view

    Fig. Exploded view of the power steering pump (1), suction hose (2), flexible hose (3) and bolt (4)

  10.  

To install:

  1. Install the pump assembly to the pump bracket, tighten the mounting bolt to 34 ft. lbs. (46 Nm).
  2.  
  3. Install the flexible hose. Tighten the eye bolt to 40 ft. lbs. (54 Nm).
  4.  
  5. Install the drive belt.
  6.  
  7. Connect the suction hose, then fill and bleed the system, as outlined in this section.
  8.  

 
label.common.footer.alt.autozoneLogo