Honda_Passport_1997-2002

Lateral Rod

Print

Removal And Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Raise and safely support the vehicle.
  4.  
  5. Remove the nuts and bolts and remove the rod.
  6.  
  7. Installation is the reverse of removal. Install the nuts and bolts finger tight, then tighten the frame end to 101 ft. lbs. (137 Nm) and the axle end to 58 ft. lbs. (78 Nm) when the weight of the vehicle is on the suspension.

    Click image to see an enlarged view

    Fig. Lateral rod

  8.  

 
label.common.footer.alt.autozoneLogo