Honda_Passport_1997-2002

Upper Link

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Raise and safely support the vehicle.
  4.  
  5. Remove the fuel tank.
  6.  
  7. Remove the speed sensor cable from the link.
  8.  
  9. Remove the nuts and bolts and remove the link.
  10.  
  11. Installation is the reverse of removal. Install the nuts and bolts finger tight, then tighten them to 101 ft. lbs. (137 Nm) when the weight of the vehicle is on the suspension.

    Click image to see an enlarged view

    Fig. Upper link

  12.  

 
label.common.footer.alt.autozoneLogo