Honda Pilot - 2003-2005

Exhaust Manifold

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the precautions section.
  2.  
  3. Remove or disconnect the following:

    Negative battery cable
     
    Exhaust manifold heat shield
     
    Heated Oxygen (HO 2 S) sensor connector
     
    Exhaust front pipe
     
    Exhaust manifold bracket, if equipped
     
    Exhaust manifold
     

  4.  

To install:

  1. Install or connect the following:

    Exhaust manifold. Tighten the fasteners to 23 ft. lbs. (31 Nm).
     
    Exhaust manifold bracket, if equipped. Tighten the bolts to 33 ft. lbs. (44 Nm).
     
    Exhaust front pipe. Tighten the nuts to 40 ft. lbs. (55 Nm).
     
    Heated Oxygen (HO 2 S) sensor connector
     
    Exhaust manifold heat shield
     
    Negative battery cable
     

  2.  

 
label.common.footer.alt.autozoneLogo