Honda Pilot - 2003-2005

Rear Main Seal

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the precautions section.
  2.  
  3. Remove or disconnect the following:

    Transaxle
     
    Flywheel
     
    Oil seal
     

  4.  

To install:

  1. Install or connect the following:

    Oil seal. Drive the seal square into the seal case.
     
    Flywheel. Tighten the bolts in a crossing pattern to 54 ft. lbs. (73 Nm).
     
    Transaxle
     

  2.  
  3. Check the fluid levels.
  4.  
  5. Start the engine and check for leaks.
  6.  

 
label.common.footer.alt.autozoneLogo