Honda Pilot - 2003-2005

Strut (MacPherson Strut) & Coil Spring

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the precautions section.
  2.  
  3. Remove or disconnect the following:

    Front wheel
     
    Wheel speed sensor wiring bracket
     
    Brake hose bracket
     
    Stabilizer bar link
     
    Strut pinch bolts
     
    Upper mount nuts
     
    Strut
     

  4.  

To install:

  1. Install or connect the following:

    Strut. Tighten the upper mount nuts to 43 ft. lbs. (59 Nm).
     
    Strut pinch bolts. Tighten the nuts to 116 ft. lbs. (157 Nm).
     
    Stabilizer bar link. Tighten the nut to 58 ft. lbs. (78 Nm).
     
    Brake hose bracket
     
    Wheel speed sensor wiring bracket
     
    Front wheel
     

  2.  
  3. Check the wheel alignment and adjust as necessary.

    Click image to see an enlarged view

    Fig. Exploded view of the front strut assembly

  4.  

 
label.common.footer.alt.autozoneLogo