Control Arm Bushing Replacement
The control arm bushings are serviced with the control arms as an assembly.
Removal & Installation
- Before servicing the vehicle, refer to the precautions section.
- Support the control arm at the knuckle.
Remove or disconnect the following:
- Installation is the reverse of removal. Tighten the arm bolt to 47 ft. lbs. (64 Nm) on 2003-04 models or 69 ft. lbs. (93 Nm( on 2005 models. Tighten the ball joint nut to 36-43 ft. lbs. (49-59 Nm).