Honda Pilot - 2003-2005

Oil Pressure Switch

Print

Removal & Installation



  1. Disconnect the negative battery cable.
  2.  
  3. Disconnect the oil pressure switch connector, then remove the oil pressure switch.
  4.  
  5. Remove any old liquid gasket from the switch and switch mounting hole.
  6.  

To install:

  1. Apply liquid gasket to the new oil pressure switch, then install the oil pressure switch. Tighten the switch to 13 ft. lbs. (18 Nm).
    NOTE
    Do not install the part if 4 minutes or more have elapsed since applying liquid gasket. Instead, reapply liquid gasket after removing the old residue.

  2.  
  3. Connect the oil pressure switch connector.
  4.  
  5. Connect the negative battery cable.

    Click image to see an enlarged view

    Fig. Make sure to tighten the oil pressure switch to specifications during installation-2003-04 models



    Click image to see an enlarged view

    Fig. Oil pressure switch mounting-2005 models

  6.  

 
label.common.footer.alt.autozoneLogo