Honda Prelude Accord Civic S2000 2001-2006

Hydraulic System

Print

Hydraulic System Bleeding



  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Fill the clutch master cylinder reservoir with clean DOT 3 or 4 brake fluid.
  4.  
  5. Attach a rubber tube to the clutch slave cylinder bleed screw. Route the tube into a container of clean brake fluid.
  6.  
  7. Loosen the bleed screw.
  8.  
  9. Slowly pump the clutch pedal until the fluid draining from the slave cylinder is free of air bubbles.
  10.  
  11. Tighten the bleed screw to 72-84 inch lbs. (8-10 Nm).
  12.  
  13. Refill the clutch master cylinder reservoir with brake fluid.
  14.  

  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2.  
  3. Fill the clutch master cylinder reservoir with clean DOT 3 or 4 brake fluid.
  4.  
  5. Attach a rubber tube to the clutch slave cylinder bleed screw. Route the tube into a container of clean brake fluid.
  6.  
  7. Loosen the bleed screw.
  8.  
  9. Slowly pump the clutch pedal until the fluid draining from the slave cylinder is free of air bubbles.
  10.  
  11. Tighten the bleed screw to 72-84 inch lbs. (8-10 Nm).
  12.  
  13. Refill the clutch master cylinder reservoir with brake fluid.
  14.  

 
label.common.footer.alt.autozoneLogo