Honda Prelude Accord Civic S2000 2001-2006

Slave Cylinder

Print

Removal & Installation



  1. Locate the slave cylinder mounted on the transaxle assembly, near the radiator.
  2.  
  3. Remove the flare fitting and steel line from the slave cylinder assembly.
  4.  
  5. Remove the slave cylinder from the clutch housing by removing the attaching bolts.
  6.  
  7. Installation is the reverse of the removal procedure
    NOTE
    Use only fresh DOT 3 or 4 brake fluid from a sealed container to refill the clutch hydraulic system.

  8.  
  9. Fill, then bleed the clutch system, using a suitable DOT 3 or 4 brake fluid.

    Click image to see an enlarged view

    Fig. The slave cylinder (B) is mounted to the transaxle with retaining bolts (A & C)-Accord shown



    Click image to see an enlarged view

    Fig. Installed view of the slave cylinder-Prelude shown

  10.  

 
label.common.footer.alt.autozoneLogo