Honda Prelude Accord Civic S2000 2001-2006

Stabilizer Bar (Sway Bar)

Print

Removal & Installation



Accord
  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2.  
  3. Raise and support the vehicle safely. Remove the front tires.
  4.  
  5. Disconnect the stabilizer links from the stabilizer bar on the right and left sides.
  6.  
  7. Remove the front suspension subframe from the body.

    Click image to see an enlarged view

    Fig. Front subframe and related components-2003-06 Accord

  8.  
  9. Remove the flange bolts and bushing holders. Remove the bushings and the stabilizer bar from the vehicle.
  10.  

To install:

  1. Position the assembly to it-s mounting on the vehicle.
  2.  
  3. Install the mounting bolts.
  4.  
  5. Continue the installation in the reverse order of the removal procedure.
  6.  

Civic
2001-05 Models
  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2.  
  3. Raise and support the vehicle safely. Remove the front tires.
  4.  
  5. Remove the self locking nuts while holding the joint pin. Disconnect the stabilizer links from the stabilizer bar on the right and left sides.
  6.  
  7. Remove the flange bolts and bushing holders. Remove the bushings and the stabilizer bar from the vehicle.
  8.  

To install:

  1. Position the assembly to it-s mounting on the vehicle.
  2.  
  3. Install the mounting bolts.
  4.  
  5. Continue the installation in the reverse order of the removal procedure.
  6.  

2006 Models
  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2.  
  3. Raise and support the vehicle safely. Remove the front tires.
  4.  
  5. Disconnect both stabilizer links from the stabilizer bar.
  6.  
  7. Remove the flange bolts and the bushing holders. Remove the bushings and the stabilizer bar from the front suspension subframe.
  8.  

To install:

  1. Position the assembly to it-s mounting on the vehicle.
  2.  
  3. Install the mounting bolts.
  4.  
  5. Continue the installation in the reverse order of the removal procedure.
  6.  

S2000
  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2.  
  3. Raise and support the vehicle safely. Remove the front tires. Remove the splash shield.
  4.  
  5. Remove the self locking nuts while holding the joint pin. Disconnect the stabilizer links from the stabilizer bar on the right and left sides.
  6.  
  7. Remove the flange bolts and bushing holders. Remove the bushings and the stabilizer bar from the vehicle.
  8.  

To install:

  1. Position the assembly to it-s mounting on the vehicle.
  2.  
  3. Install the mounting bolts.
  4.  
  5. Continue the installation in the reverse order of the removal procedure.
  6.  

 
label.common.footer.alt.autozoneLogo