Honda_Ridgeline_2006

Alternator

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Make sure you have the anti-theft codes for the radio and navigation systems.
  4.  
  5. Remove or disconnect the following:

    Negative battery cable
     
    Positive battery cable
     
    Intake manifold cover
     
    Accessory drive belt
     
    Alternator wiring harness connectors
     
    Alternator mounting bolts
     
    Wiring harness clamp
     
    Alternator

    Click image to see an enlarged view

    Fig. Alternator mounting

     

  6.  

To install:

  1. Install or connect the following:

    Alternator
     
    Wiring harness clamp. Tighten the bolt to 105 inch lbs. (12 Nm).
     
    Alternator mounting bolts. Tighten the 10mm bolt to 33 ft. lbs. (44 Nm) and the 8mm bolt to 16 ft. lbs. (22 Nm).
     
    Alternator wiring harness connectors. Tighten the battery terminal nut to 105 inch lbs. (12 Nm).
     
    Accessory drive belt
     
    Intake manifold cover
     
    Positive cable
     
    Negative battery cable
     

  2.  
  3. Enter the theft codes
  4.  

 
label.common.footer.alt.autozoneLogo