Honda_Ridgeline_2006

Ignition Coils

Print

Removal & Installation



  1. Disconnect the negative battery cable.
  2.  
  3. Remove the intake manifold cover.
  4.  
  5. Disconnect the ignition coil connectors, then remove the front bank ignition coils.
  6.  
  7. Disconnect the ignition coil connectors, then remove the rear bank ignition coils.
  8.  
  9. Install the ignition coils in the reverse order of removal. Tighten the coil retaining bolts to 8.7 ft. lbs. (12 Nm).

    Click image to see an enlarged view

    Fig. View of the ignition coil connectors (A) and ignition coils (B)-front bank shown, rear bank similar

  10.  

 
label.common.footer.alt.autozoneLogo