Honda_Ridgeline_2006

Removal & Installation

Print

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Raise and support the vehicle.
  4.  
  5. Remove the front and rear driveshaft protector loops.
  6.  
  7. Matchmark the front driveshaft and transfer case flange.
  8.  
  9. Remove the bolts.
  10.  
  11. Remove the center bearing bolts.
  12.  
  13. Matchmark the rear driveshaft and differential flange.
  14.  
  15. Remove the bolts and remove the driveshaft assembly.
  16.  
  17. Installation is the reverse of removal. Align all matchmarks. Torque the flange bolts to 53 ft. lbs. (72 Nm). Torque the center bearing bolts to 29 ft. lbs. (39 Nm). Torque the loop bolts to 16 ft. lbs. (22 Nm).
  18.  

 
label.common.footer.alt.autozoneLogo