Honda_Ridgeline_2006

Thermostat

Print

Removal & Installation



  1. Remove the breather pipe, then remove the air intake duct.
  2.  
  3. Drain the engine coolant.
  4.  
  5. Remove the ground cable and thermostat cover, then remove the thermostat.
  6.  

To install:

  1. Install the thermostat with a new rubber seal.
  2.  
  3. Refill the radiator with engine coolant, then bleed air from the cooling system.
  4.  
  5. Clean up any spilled engine coolant.

    Click image to see an enlarged view

    Fig. Exploded view of the thermostat mounting

  6.