Honda_Ridgeline_2006

Water Pump

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Drain the cooling system.
  4.  
  5. Remove or disconnect the following:

    Negative battery cable
     
    Accessory drive belts
     
    Front cover
     
    Timing belt
     
    Timing belt tensioner
     
    Water pump

    Click image to see an enlarged view

    Fig. Exploded view of the water pump mounting. A is the pump; B is the seal

     

  6.  

To install:

  1. Install or connect the following:

    Water pump. Use a new O-ring seal and tighten the bolts to 105 inch lbs. (12 Nm).
     
    Timing belt tensioner
     
    Timing belt
     
    Front cover
     
    Accessory drive belts
     
    Negative battery cable
     

  2.  
  3. Fill the cooling system.
  4.  
  5. Start the engine and check for leaks.
  6.  

 
label.common.footer.alt.autozoneLogo