Honda_Ridgeline_2006

Blower Motor

Print

Removal & Installation



  1. Remove the glove box housing, as follows:
    1. While holding the glove box, remove the glove box stop on each side.
    2.  
    3. Disconnect the glove box damper from the glove box.
    4.  
    5. Remove the bolts, then remove the glove box.
    6.  

  2.  
  3. Remove the bolts and the glove box frame.

    Click image to see an enlarged view

    Fig. Remove the bolts and the glove box frame (A)

  4.  
  5. Detach the connector, unfasten the retainers, then remove the blower motor.
  6.  
  7. Installation is the reverse of the removal procedure.

    Click image to see an enlarged view

    Fig. Exploded view of the blower motor (C) and related components

  8.  

 
label.common.footer.alt.autozoneLogo