Honda_Ridgeline_2006

Coil Spring

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Place the strut in a spring compressor.
  4.  
  5. Compress the spring and remove the shaft nut.
  6.  
  7. Release the spring pressure
  8.  

To assemble:

  1. Compress the spring.
  2.  
  3. Assemble all parts except the shaft washer and nut.
  4.  
  5. Align the spring as shown.

    Click image to see an enlarged view

    Fig. Spring alignment. (A) strut, (B) spring, (C) lower spring seat, (D) mounting base

  6.  
  7. Install the washer and NEW nut. Torque to 22 ft. lbs. (29 Nm).

    Click image to see an enlarged view

    Fig. Rear suspension components

  8.  

 
label.common.footer.alt.autozoneLogo