Honda_Ridgeline_2006

Relieving Fuel System Pressure

Print

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove the left kick panel, then remove the PGM-FI main relay 2 (FUEL PUMP).
  4.  
  5. Start the engine and let it idle until it stalls.
  6.  
  7. Turn the ignition off.
  8.  
  9. Remove the fuel filler cap.
  10.  
  11. Disconnect the battery ground.
  12.  
  13. Remove the quick-connect fitting cover from the fuel supply line, cover the fitting with a shop rag and disconnect the fitting.
  14.  
  15. After recharging, use the HDS to reset the power window control unit.
  16.  

 
label.common.footer.alt.autozoneLogo