Honda_Ridgeline_2006

Removal & Installation

Print

  1. Disconnect the negative battery cable and wait at least 3 minutes.
  2.  
  3. Place the wheels in the straight-ahead position.
  4.  
  5. Remove the steering wheel air bag access cover and disconnect the air bag connector from the cable reel.
  6.  
  7. Remove the 2 Torx®bolts, one each side of the steering wheel hub.
  8.  
  9. Disconnect the horn switch connector.
  10.  
  11. Remove the air bag.
  12.  
  13. Disconnect the cable reel harness.
  14.  
  15. Remove the steering wheel nut.
  16.  
  17. Using a puller, remove the steering wheel.
  18.  
  19. Installation is the reverse of removal. Torque the steering wheel nut to 36 ft. lbs. (49 Nm).

    Click image to see an enlarged view

    Fig. Steering wheel and related parts

  20.  

 
label.common.footer.alt.autozoneLogo