Hyundai Car 1999-05

CV-Joints

Print

Overhaul



Inner Joint
Double Offset Joint
  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Remove or disconnect the following:
    NOTE
    Do not disassemble the inner race, cage and ball assembly.



    Axle halfshaft from the vehicle
     
    Inner boot clamps and push the boot back
     
    Circlip
     
    CV-joint housing
     
    Snapring
     
    Double offset joint inner race, cage and ball assembly
     
    CV-joint boot
     

  4.  

To install:

  1. Install or connect the following:

    CV-joint boot
     
    Double offset joint inner race, cage and ball assembly
     
    Snapring
     

  2.  
  3. Apply clean grease to the CV-joint housing and the boot.

    CV-joint housing
     
    Circlip
     
    Boot clamps by tightening them
     
    Axle to the vehicle
     

  4.  

Tripod Joint
  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Remove or disconnect the following:
    NOTE
    Do not disassemble the spider and rollers.



    Axle halfshaft from the vehicle
     
    Inner boot clamps and push the boot back
     
    CV-joint housing
     
    Snapring
     
    Spider and rollers
     
    CV-joint boot
     

  4.  

To install:

  1. Install or connect the following:

    CV-joint boot
     
    Spider and rollers
     
    Snapring
     

  2.  
  3. Apply clean grease to the CV-joint housing and the boot.

    CV-joint housing and tighten the boot clamps
     
    Axle to the vehicle
     

  4.  

Outer Joint

The outer CV-joint is serviced with the axle halfshaft as an assembly. The outer CV-joint boot may be replaced by first removing the inner joint.

 
label.common.footer.alt.autozoneLogo