Hyundai Car 1999-05

Coil Springs

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Remove the strut from the vehicle and install a Spring Compressor Tool, such as J38402.
  4.  
  5. Compress the coil spring so that the end of the spring comes away from the spring seat.
  6.  
  7. Remove or disconnect the following:

    Self locking nut
     

  8.  
  9. Install the Compressor Tool, J38402.
  10.  
  11. Remove the bracket, spring pad and coil spring.
  12.  

To install:

  1. Compress the coil spring with Compressor Tool J38402.
  2.  
  3. Install or connect the following:

    Coil spring to the strut
     
    Dust cover, upper spring pad, bushing and hand tighten the lock nut
     

  4.  
  5. Remove the compressor tool when the coil spring is properly aligned and torque the lock nut to 18 ft. lbs. (25 Nm).
  6.  
  7. Install the strut assembly.
  8.  

  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2.  
  3. Remove the strut from the vehicle and install a spring compressor.
  4.  
  5. Compress the coil spring so that the end of the spring comes away from the spring seat.
  6.  
  7. Remove or disconnect the following:

    Upper strut mount
     
    Upper spring seat
     
    Compressed spring from the strut
     
    Spring from the spring compressor

    Click image to see an enlarged view

    Fig. Rear strut components

     

  8.  

To install:

  1. Compress the spring and install it on the strut.
  2.  
  3. Install or connect the following:

    Upper spring seat and the upper strut mount and torque the nut to 29-36 ft. lbs. (40-50 Nm)
     
    Strut to the vehicle
     

  4.  
  5. Check and/or adjust the wheel alignment.
  6.  

  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2.  
  3. Remove the strut from the vehicle and install a Spring Compressor Tool, such as J38402.
  4.  
  5. Compress the coil spring so that the end of the spring comes away from the spring seat.
  6.  
  7. Remove or disconnect the following:

    Self locking nut
     

  8.  
  9. Install the Compressor Tool, J38402.
  10.  
  11. Remove the bracket, spring pad and coil spring.
  12.  

To install:

  1. Ccompress the coil spring with Compressor Tool J38402.
  2.  
  3. Install or connect the following:

    Coil spring to the strut
     
    Dust cover, upper spring pad, bushing and hand tighten the lock nut
     

  4.  
  5. Remove the compressor tool when the coil spring is properly aligned and torque the lock nut to 18 ft. lbs. (25 Nm).
  6.  
  7. Install the strut assembly.
  8.  

  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Remove the strut from the vehicle and install a spring compressor.
  4.  
  5. Compress the coil spring so that the end of the spring comes away from the spring seat.
  6.  
  7. Remove or disconnect the following:

    Upper strut mount
     
    Upper spring seat
     
    Compressed spring from the strut
     
    Spring from the spring compressor

    Click image to see an enlarged view

    Fig. Rear strut components

     

  8.  

To install:

  1. Compress the spring and install it on the strut.
  2.  
  3. Install or connect the following:

    Upper spring seat and the upper strut mount and torque the nut to 29-36 ft. lbs. (40-50 Nm)
     
    Strut to the vehicle
     

  4.  
  5. Check and/or adjust the wheel alignment.
  6.  

  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Remove the strut from the vehicle and install a Spring Compressor Tool, such as J38402.
  4.  
  5. Compress the coil spring so that the end of the spring comes away from the spring seat.
  6.  
  7. Remove or disconnect the following:

    Self locking nut
     

  8.  
  9. Install the Compressor Tool, J38402.
  10.  
  11. Remove the bracket, spring pad and coil spring.
  12.  

To install:

  1. Compress the coil spring with Compressor Tool J38402.
  2.  
  3. Install or connect the following:

    Coil spring to the strut
     
    Dust cover, upper spring pad, bushing and hand tighten the lock nut
     

  4.  
  5. Remove the compressor tool when the coil spring is properly aligned and torque the lock nut to 18 ft. lbs. (25 Nm).
  6.  
  7. Install the strut assembly.
  8.  

 
label.common.footer.alt.autozoneLogo