Hyundai Car 1999-05

Control Arm Bushing

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Remove or disconnect the following:

    Control arm from the vehicle
     
    Control arm bushings by unbolting them
     

  4.  

To install:

  1. Install or connect the following:

    New bushings and torque the bolts to 40-48 ft. lbs. (55-65 Nm)
     
    Control arm to the vehicle
     

  2.  

The front control arm bushing is serviced with the control arm as an assembly.

Front Bushing
  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Remove the lower control arm from the vehicle.
  4.  
  5. Press the front bushing out of the control arm.
  6.  

To install:

  1. Lubricate the front bushing with soap and press into the control arm.
  2.  
  3. Install the control arm to the vehicle.
  4.  
  5. Check and/or adjust the wheel alignment.
  6.  

Rear Bushing
  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Remove or disconnect the following:

    Front wheel
     
    Rear bushing bracket
     
    Rear bushing nut
     
    Rear bushing
     

  4.  

To install:

  1. Install or connect the following:

    Rear bushing and torque the nut to 25-33 ft. lbs. (35-45 Nm)
     
    Rear bushing bracket and torque the bolts to 58-72 ft. lbs. (80-100 Nm)
     
    Front wheel
     

  2.  
  3. Check and/or adjust the wheel alignment.
  4.  

Rear Bushing And Damper Fork Bushing
  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Remove the control arm from the vehicle.
  4.  
  5. Press the rear bushing and the damper fork bushing out of the control arm.
  6.  

To install:

  1. Press the rear bushing and the damper fork bushing into the control arm.
  2.  
  3. Install the control arm to the vehicle.
  4.  
  5. Check and/or adjust the wheel alignment.
  6.  

 
label.common.footer.alt.autozoneLogo