Hyundai Car 1999-05

Lower Control Arms

Print

Bushing Replacement



Front Bushing
  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Remove the lower control arm from the vehicle.
  4.  
  5. Press the front bushing out of the control arm.
  6.  

To install:

  1. Lubricate the front bushing with soap and press into the control arm.
  2.  
  3. Install the control arm to the vehicle.
  4.  
  5. Check and/or adjust the wheel alignment.
  6.  

The front control arm bushing is serviced with the control arm as an assembly.

  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2.  
  3. Remove the lower control arm from the vehicle.
  4.  
  5. Press the front bushing out of the control arm.
  6.  

To install:

  1. Lubricate the front bushing with soap and press into the control arm.
  2.  
  3. Install the control arm to the vehicle.
  4.  
  5. Check and/or adjust the wheel alignment.
  6.  

The front control arm bushing is serviced with the control arm as an assembly.

Rear Bushing
  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Remove or disconnect the following:

    Front wheel
     
    Rear bushing bracket
     
    Rear bushing nut
     
    Rear bushing
     

  4.  

To install:

  1. Install or connect the following:

    Rear bushing and torque the nut to 25-33 ft. lbs. (35-45 Nm)
     
    Rear bushing bracket and torque the bolts to 58-72 ft. lbs. (80-100 Nm)
     
    Front wheel
     

  2.  
  3. Check and/or adjust the wheel alignment.
  4.  

  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2.  
  3. Remove or disconnect the following:

    Front wheel
     
    Rear bushing bracket
     
    Rear bushing nut
     
    Rear bushing
     

  4.  

To install:

  1. Install or connect the following:

    Rear bushing and torque the nut to 25-33 ft. lbs. (35-45 Nm)
     
    Rear bushing bracket and torque the bolts to 58-72 ft. lbs. (80-100 Nm)
     
    Front wheel
     

  2.  
  3. Check and/or adjust the wheel alignment.
  4.  

Rear Bushing & Damper Fork Bushing
  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2.  
  3. Remove the control arm from the vehicle.
  4.  
  5. Press the rear bushing and the damper fork bushing out of the control arm.
  6.  

To install:

  1. Press the rear bushing and the damper fork bushing into the control arm.
  2.  
  3. Install the control arm to the vehicle.
  4.  
  5. Check and/or adjust the wheel alignment.
  6.  

Rear Bushing And Damper Fork Bushing
  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Remove the control arm from the vehicle.
  4.  
  5. Press the rear bushing and the damper fork bushing out of the control arm.
  6.  

To install:

  1. Press the rear bushing and the damper fork bushing into the control arm.
  2.  
  3. Install the control arm to the vehicle.
  4.  
  5. Check and/or adjust the wheel alignment.
  6.  

Removal & Installation



  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2.  
  3. Remove or disconnect the following:

    Front wheel
     
    Stabilizer bar link
     
    Lower ball joint
     
    Rear bushing bracket
     
    Front bolt
     
    Lower control arm
     

  4.  

To install:

  1. Install or connect the following:

    Lower control arm and torque the front bolt to 72-87 ft. lbs. (100-120 Nm)
     
    Rear bushing bracket. Tighten the bolts to 58-72 ft. lbs. (80-100 Nm)
     
    Lower ball joint and torque the nut to 43-52 ft. lbs. (60-72 Nm)
     
    Stabilizer bar link and torque the nut to 25-33 ft. lbs. (35-45 Nm)
     
    Front wheel
     

  2.  
  3. Check and/or adjust the wheel alignment.
  4.  

  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2.  
  3. Remove or disconnect the following:

    Front wheel
     
    Lower ball joint nut, loosen only
     
    Lower arm ball joint from the lower arm connector with Special Tool 09445-21000
     
    Ball joint
     
    Fork from the lower arm connector
     
    Stabilizer bar link
     
    Control arm inner bushing bolts
     
    Lower control arm
     

  4.  

To install:

  1. Install or connect the following:

    Lower control arm and torque the front bushing bolts to 74-88 ft. lbs. (100-120 Nm) and the rear bushing bolt to 88-103 ft. lbs. (120-140 Nm)
     
    Stabilizer bar link and torque the nut to 26-33 ft. lbs. (35-45 Nm)
     
    Damper fork lower bolt and torque the nut to 74-88 ft. lbs. (100-120 Nm)
     
    Lower ball joint and torque the nut to 55-66 ft. lbs. (75-90 Nm)
     
    Front wheel
     

  2.  
  3. Check and/or adjust the wheel alignment.
  4.  

  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Remove or disconnect the following:

    Front wheel
     
    Stabilizer bar link
     
    Lower ball joint
     
    Rear bushing bracket
     
    Front bolt
     
    Lower control arm
     

  4.  

To install:

  1. Install or connect the following:

    Lower control arm and torque the front bolt to 72-87 ft. lbs. (100-120 Nm)
     
    Rear bushing bracket. Tighten the bolts to 58-72 ft. lbs. (80-100 Nm)
     
    Lower ball joint and torque the nut to 43-52 ft. lbs. (60-72 Nm)
     
    Stabilizer bar link and torque the nut to 25-33 ft. lbs. (35-45 Nm)
     
    Front wheel
     

  2.  
  3. Check and/or adjust the wheel alignment.
  4.  

  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Remove or disconnect the following:

    Front wheel
     
    Lower ball joint nut, loosen only
     
    Lower arm ball joint from the lower arm connector with Special Tool 09445-21000
     
    Ball joint
     
    Fork from the lower arm connector
     
    Stabilizer bar link
     
    Control arm inner bushing bolts
     
    Lower control arm
     

  4.  

To install:

  1. Install or connect the following:

    Lower control arm and torque the front bushing bolts to 74-88 ft. lbs. (100-120 Nm) and the rear bushing bolt to 88-103 ft. lbs. (120-140 Nm)
     
    Stabilizer bar link and torque the nut to 26-33 ft. lbs. (35-45 Nm)
     
    Damper fork lower bolt and torque the nut to 74-88 ft. lbs. (100-120 Nm)
     
    Lower ball joint and torque the nut to 55-66 ft. lbs. (75-90 Nm)
     
    Front wheel
     

  2.  
  3. Check and/or adjust the wheel alignment.
  4.  

 
label.common.footer.alt.autozoneLogo