Hyundai Car 1999-05

Upper Control Arms

Print

Bushing Replacement



  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Remove or disconnect the following:

    Control arm from the vehicle
     
    Control arm bushings by unbolting them
     

  4.  

To install:

  1. Install or connect the following:

    New bushings and torque the bolts to 40-48 ft. lbs. (55-65 Nm)
     
    Control arm to the vehicle
     

  2.  

  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2.  
  3. Remove or disconnect the following:

    Control arm from the vehicle
     
    Control arm bushings by unbolting them
     

  4.  

To install:

  1. Install or connect the following:

    New bushings and torque the bolts to 40-48 ft. lbs. (55-65 Nm)
     
    Control arm to the vehicle
     

  2.  

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Support the lower control arm assembly with a floor jack.
  4.  
  5. Remove or disconnect the following:

    Front wheel
     
    Ball joint nut, loosen only
     
    Upper arm ball joint from the steering knuckle with Special Tool 09568-34000
     
    Wheel house panel nuts
     
    Upper arm assembly
     
    Upper arm shaft
     

  6.  


    Click image to see an enlarged view

    Fig. Exploded view of the upper control arm assembly-Sonata


To install:

  1. Install or connect the following:

    Upper control arm shaft
     
    Upper control arm assembly and torque the bolts to 73 ft. lbs. (100 Nm)
     
    Wheel house panel nuts and torque the nuts to 48 ft. lbs. (65 Nm)
     
    Upper arm ball joint to the steering knuckle and torque the bolts to 33 ft. lbs. (45 Nm)
     
    Front wheel
     

  2.  

  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2.  
  3. Support the lower control arm assembly with a floor jack.
  4.  
  5. Remove or disconnect the following:

    Front wheel
     
    Ball joint nut, loosen only
     
    Upper arm ball joint from the steering knuckle with Special Tool 09568-34000
     
    Wheel house panel nuts
     
    Upper arm assembly
     
    Upper arm shaft

    Click image to see an enlarged view

    Fig. Exploded view of the upper control arm assembly-Sonata

     

  6.  

To install:

  1. Install or connect the following:

    Upper control arm shaft
     
    Upper control arm assembly and torque the bolts to 73 ft. lbs. (100 Nm)
     
    Wheel house panel nuts and torque the nuts to 48 ft. lbs. (65 Nm)
     
    Upper arm ball joint to the steering knuckle and torque the bolts to 33 ft. lbs. (45 Nm)
     
    Front wheel
     

  2.  

  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Support the lower control arm assembly with a floor jack.
  4.  
  5. Remove or disconnect the following:

    Front wheel
     
    Ball joint nut, loosen only
     
    Upper arm ball joint from the steering knuckle with Special Tool 09568-34000
     
    Wheel house panel nuts
     
    Upper arm assembly
     
    Upper arm shaft

    Click image to see an enlarged view

    Fig. Exploded view of the upper control arm assembly-Sonata

     

  6.  

To install:

  1. Install or connect the following:

    Upper control arm shaft
     
    Upper control arm assembly and torque the bolts to 73 ft. lbs. (100 Nm)
     
    Wheel house panel nuts and torque the nuts to 48 ft. lbs. (65 Nm)
     
    Upper arm ball joint to the steering knuckle and torque the bolts to 33 ft. lbs. (45 Nm)
     
    Front wheel
     

  2.  

 
label.common.footer.alt.autozoneLogo