Hyundai Car 1999-05

Adjustment

Print

These engines are equipped with a Distributorless Ignition System (DIS). No adjustment is necessary.

1.8L & 3.0L (VIN T) Engines




NOTE
Timing is adjusted with the engine at normal operating temperature and all electrical accessories OFF.

  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2.  
  3. Start the engine and allow it to reach operating temperature.
  4.  
  5. Turn the engine OFF .
  6.  
  7. Ground the ignition timing terminal.

    Click image to see an enlarged view

    Fig. Connect the jumper wire from ground to the ignition timing terminal-3.0L engine



    Click image to see an enlarged view

    Fig. Connect the jumper wire from ground to the ignition timing terminal-1.8L engines

  8.  
  9. Connect a timing light to the No. 1 spark plug wire.
  10.  
  11. Start the engine and check the base timing. Base timing should be 3-7 degrees Before Top Dead Center (BTDC).
  12.  
  13. Adjust the timing as necessary.
  14.  
  15. Turn the engine OFF .
  16.  
  17. Remove the ignition timing connector ground wire and the timing light.
  18.  


NOTE
Timing is adjusted with the engine at normal operating temperature and all electrical accessories OFF.

  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Start the engine and allow it to reach operating temperature.
  4.  
  5. Turn the engine OFF .
  6.  
  7. Ground the ignition timing terminal.

    Click image to see an enlarged view

    Fig. Connect the jumper wire from ground to the ignition timing terminal-3.0L engine



    Click image to see an enlarged view

    Fig. Connect the jumper wire from ground to the ignition timing terminal-1.8L engines

  8.  
  9. Connect a timing light to the No. 1 spark plug wire.
  10.  
  11. Start the engine and check the base timing. Base timing should be 3-7 degrees Before Top Dead Center (BTDC).
  12.  
  13. Adjust the timing as necessary.
  14.  
  15. Turn the engine OFF .
  16.  
  17. Remove the ignition timing connector ground wire and the timing light.
  18.  

Except 1.8L And 3.0L (VIN T) Engines



These engines are equipped with a Distributorless Ignition System (DIS). No adjustment is necessary.

These engines are equipped with a Distributorless Ignition System (DIS). No adjustment is necessary.

 
label.common.footer.alt.autozoneLogo