Hyundai Car 1999-05

Locks & Lock Systems

Print

Power Door Locks



Removal & Installation
Door Lock Motor
Front

NOTE
Put on gloves to protect your hands.

  1. Remove the front door trim.
  2.  
  3. Remove the glass.
  4.  
  5. Disconnect the wiring harness (A).

    Click image to see an enlarged view

    Fig. Front door lock wiring harness

  6.  
  7. Disconnect the lock rod (A) and outside handle rod (B).
  8.  
  9. Remove the door lock module (C).

    Click image to see an enlarged view

    Fig. Front door lock module

  10.  
  11. Installation is the reverse or removal.
    NOTE
    Make sure the connectors is plugged in properly and each cable is connected securely.


    NOTE
    Make sure the door locks and opens properly.


    NOTE
    Roll the glass and down to see if it moves freely without binding.

  12.  

Rear
  1. Remove the door trim.
  2.  
  3. Remove the glass.
  4.  
  5. Remove the rear channel.
  6.  
  7. Disconnect the power window motor connector (A), speaker connector (B) and actuator connector (C). Detach the harness clip.

    Click image to see an enlarged view

    Fig. Rear door wiring harness

  8.  
  9. Remove the door module assembly (A).

    Click image to see an enlarged view

    Fig. Rear door lock module

  10.  
  11. Installation is the reverse of removal. Make sure the door locks and opens properly.
  12.  

Door Lock Switch
  1. Remove screws holding power window main switch to the door trim panel.
  2.  
  3. Remove the power window main switch from the driver's door trim panel.
  4.  
  5. Detach the connector from the switch to the window motor.
  6.  
  7. Installation is the reveres of the removal.
  8.  

 
label.common.footer.alt.autozoneLogo