Hyundai Car 1999-05

Brake Drums

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Remove or disconnect the following:

    Wheels
     
    Dust cap, cotter pin, nut lock, wheel bearing nut and washer from the spindle
     
    Outer wheel bearing
     
    Drum with the inner wheel bearing from the spindle
     

  4.  

To install:

  1. Install or connect the following:

    Lubricated inner wheel bearing
     
    New grease seal
     
    Drum to the spindle
     
    Lubricated outer wheel bearing, washer and nut. Adjust the bearing preload as required.
     
    Nut lock and a new cotter pin
     
    Grease cap
     
    Wheels. Adjust the rear brakes as required.
     

  2.  


    Click image to see an enlarged view

    Fig. Rear drum brakes-Accent shown


  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Remove or disconnect the following:

    Wheel
     
    Drum
     

  4.  
  5. Installation is the reverse of the removal procedure.
  6.  

 
label.common.footer.alt.autozoneLogo