Hyundai Car 1999-05

Brake Shoes

Print

Adjustment



Self adjusting system.

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Remove or disconnect the following:

    Wheels
     
    Brake drum
     
    Self-adjuster spring and the adjuster lever
     
    Spread the shoes and remove the adjuster strut
     
    Shoe-to-shoe spring and the hold-down springs
     
    Primary brake shoe
     
    Horseshoe clip and the parking brake lever from the secondary brake shoe
     

  4.  

To install:

  1. Clean the backing plate with brake cleaning solvent.
  2.  
  3. Install or connect the following:

    Light coating of lithium grease to the friction points on the backing plate
     
    Primary shoe on the backing plate
     
    Hold-down spring and pin
     
    Parking brake lever to the secondary shoe
     
    Secondary shoe to the backing plate
     
    Adjuster strut assembly and the adjuster lever and spring
     
    Lower shoe-to-shoe spring
     
    Brake drum and the wheel
     

  4.  
  5. Adjust the brake shoes.
  6.  

  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Remove or disconnect the following:

    Wheel
     
    Drum
     
    Brake shoe hold-down spring
     
    Brake strut
     
    Brake shoe return spring
     
    Brake shoes
     

  4.  

To install:

  1. Install or connect the following:

    Brake shoes
     
    Brake shoe return spring
     
    Brake strut
     
    Brake shoe hold-down spring
     
    Brake drum
     
    Wheel
     

  2.  
  3. Adjust the brake shoes.
  4.  

All Models
  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2.  
  3. Remove the wheels.
  4.  
  5. Remove the brake drum.
  6.  
  7. Remove the self-adjuster spring and the adjuster lever.
  8.  
  9. Spread the shoes and remove the adjuster strut.
  10.  
  11. Remove the shoe to shoe spring and the hold- down springs.
  12.  
  13. Remove the primary brake shoe.
  14.  
  15. Remove the horseshoe clip and the parking brake lever from the secondary brake shoe.
  16.  

To install:

  1. Clean the backing plate with brake cleaning solvent.
  2.  
  3. Apply a light coating of lithium grease to the friction points on the backing plate.
  4.  
  5. Position the primary shoe on the backing plate and install the hold down spring and pin.
  6.  
  7. Install the parking brake lever to the secondary shoe and install the shoe to the backing plate.
  8.  
  9. Install the adjuster strut assembly and the adjuster lever and spring.
  10.  
  11. Install the lower shoe to shoe spring.
  12.  
  13. Install the brake drum and the wheel.
  14.  
  15. Adjust the brake shoes.
  16.  

 
label.common.footer.alt.autozoneLogo