Hyundai Cars 2006-2008

Blend Door Actuator

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Disconnect the negative (-) battery terminal.
  4.  
  5. Remove the luggage side trim.
  6.  
  7. Remove the rear heater unit.
  8.  
  9. Disconnect the blend door actuator connector.
  10.  
  11. Loosen the mounting screws and then remove the blend door actuator (B).
  12.  

To install:

  1. Installation is the reverse of the removal procedure.

    Click image to see an enlarged view

    Fig. Remove the blend door actuator (B) from the rear heater unit

  2.  

 
label.common.footer.alt.autozoneLogo