Hyundai Cars 2006-2008

Removal & Installation

Print

Specific to:

Hyundai Entourage 2007-2008

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Disconnect the negative (-) battery terminal.
  4.  
  5. Disconnect the electrical connector (A) of the blower motor.

    Click image to see an enlarged view

    Fig. Disconnect the electrical connector (A) of the blower motor

  6.  
  7. Remove the mounting screws.
  8.  
  9. Remove the blower motor (A) as shown.

    Click image to see an enlarged view

    Fig. Remove the blower motor (A)

  10.  

To install:

  1. Installation is the reverse of the removal procedure.
  2.  

Specific to:

Hyundai Accent 2006-2008

Hyundai Azera 2006-2008

Hyundai Elantra 2006-2008

Hyundai Sonata 2006-2008

Hyundai Tiburon 2006-2008

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Disconnect the negative cable from the battery.
  4.  
  5. Remove the instrument panel crash pad. Refer to Instrument Panel, removal & installation.
  6.  
  7. Disconnect the connectors from the intake actuator, the blower motor, and the power mosfet.
  8.  
  9. Remove the blower motor (A) after loosening the mounting screws.

    Click image to see an enlarged view

    Fig. Remove the blower motor (A) after loosening the mounting screws

  10.  

To install:

  1. Installation is the reverse order of removal.
    NOTE
    Make sure that there is no air leaking out of the blower and duct joints.

  2.  

 
label.common.footer.alt.autozoneLogo