Hyundai Cars 2006-2008

Slave (Actuator) Cylinder

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Disconnect the clutch tube.
  4.  
  5. Remove the 2 clutch slave cylinder mounting bolts (A).
  6.  
  7. Remove the clutch slave cylinder (also called the clutch release cylinder).

    Click image to see an enlarged view

    Fig. Disconnect the clutch tube and remove the 2 clutch release slave cylinder mounting bolts (A)

  8.  

To install:

  1. Check the clutch release cylinder for fluid leakage.
  2.  
  3. Check the clutch release cylinder boots for damage.
  4.  
  5. Coat the clutch clevis push rod with specified grease: CASMOLY® L9508.
  6.  
  7. Install the release cylinder (A) to the transaxle. Tighten the bolts to: 11-16 ft. lbs. (15-22 Nm).
  8.  
  9. Install the clutch tube.

    Click image to see an enlarged view

    Fig. Exploded view of the clutch slave cylinder

  10.  

 
label.common.footer.alt.autozoneLogo