Hyundai Cars 2006-2008

1.6L L4 VIN C Auto 6

Print

Trouble Code: P0445



EVAP Purge Solenoid Circuit Malfunction (Shorted)

Possible Causes:



Purge solenoid control circuit is shorted to system power
 
Purge control solenoid is damaged or has failed (short circuit)
 
PCM has failed
 

Trouble Code: P0446



EVAP Vent Control Solenoid Circuit Performance (Closed)

Possible Causes:



Vent solenoid control circuit is shorted to ground
 
Vent solenoid power circuit is open (check the power source)
 
Vent control solenoid is damaged or has failed
 
PCM has failed
 

Trouble Code: P0447



EVAP Vent Solenoid Circuit Short To Ground Malfunction

Possible Causes:



Purge solenoid control circuit is shorted to ground
 
Purge solenoid power circuit is open (check the power source)
 
Purge solenoid is damaged or has failed
 
PCM has failed
 

Trouble Code: P0448



EVAP Vent Solenoid Circuit Shorted To Power Malfunction

Possible Causes:



Purge solenoid control circuit is shorted to system power
 
Purge solenoid is damaged or has failed
 
PCM has failed
 

Trouble Code: P0451



EVAP Pressure Sensor Performance

Possible Causes:



Pressure sensor vacuum hoses loose or damaged
 
Pressure sensor is damaged or out-of-calibration
 
VSV for the EVAP pressure sensor is damaged or has failed
 
PCM has failed
 

Trouble Code: P0452



EVAP Pressure Sensor Circuit Low Input

Possible Causes:



Pressure sensor signal circuit is shorted to ground
 
Pressure sensor power (VREF) circuit is open
 
Pressure sensor is damaged or has failed
 
PCM has failed
 

Trouble Code: P0453



EVAP Pressure Sensor Circuit High Input

Possible Causes:



Pressure sensor signal circuit is shorted to power
 
Pressure sensor ground circuit open between sensor and PCM
 
Pressure sensor is damaged or has failed
 
PCM has failed
 

Trouble Code: P0455



EVAP System Large Leak (0.080") Detected

Possible Causes:



Canister vent (CV) solenoid may be stuck in open position
 
EVAP canister tube, EVAP canister purge outlet tube or EVAP return tube disconnected or cracked, or canister is damaged
 
EVAP canister purge valve stuck closed, or canister damaged
 
Fuel filler cap missing, loose (not tightened) or the wrong part
 
Fuel vapor hoses/tubes blocked or restricted, or fuel vapor control valve tube or fuel vapor vent valve assembly blocked
 
Fuel tank pressure (FTP) sensor has failed (mechanical fault)
 
Fuel tank control valve is contaminated, damaged or has failed
 

Trouble Code: P0456



EVAP Emission System- Leak Detected (Very Small)

Possible Causes:



Leakage in EVAP system line
 
Faulty CCV, PCSV or FTPS
 

Trouble Code: P0457



EVAP System Leak (Fuel Tank Cap) Detected

Possible Causes:



Canister vent (CV) solenoid may be stuck in open position
 
EVAP canister tube, EVAP canister purge outlet tube or EVAP return tube disconnected or cracked, or canister is damaged
 
Fuel filler cap missing, loose (not tightened) or the wrong part
 
Fuel tank pressure (FTP) sensor has failed (mechanical fault)
 
Fuel tank control valve is contaminated, damaged or has failed
 

Trouble Code: P0461



Fuel Level Sensor -A- Circuit Range/Performance

Possible Causes:



Poor connection
 
Faulty fuel level sensor
 
Faulty PCM
 

Trouble Code: P0462



Fuel Level Sensor -A- Circuit Low Input

Possible Causes:



Poor connection
 
Faulty fuel level sensor
 
Short to battery in fuel level (FLS) circuit
 
Faulty fuel level circuit (FLS)
 
Faulty PCM
 

Trouble Code: P0463



Fuel Level Sensor -A- Circuit high Input

Possible Causes:



Short to battery in fuel level (FLS) circuit
 
Faulty fuel level sensor
 
Faulty PCM
 

Trouble Code: P0464



Fuel Level Sensor -A- Circuit Intermittent

Possible Causes:



Contact resistance in connectors
 
Short to battery in fuel level (FLS) circuit
 

Trouble Code: P0500



Vehicle Speed Sensor Performance

Possible Causes:



VSS signal circuit is open or shorted to ground
 
VSS power or ground circuit is open
 
VSS is damaged or has failed
 
PCM has failed
 

Trouble Code: P0501



Vehicle Speed Sensor Circuit Range/Performance

Possible Causes:



VSS signal circuit from the sensor to the I/P Cluster to the PCM is open, shorted to ground or to system power
 
VSS (Magnetic) signal (+) or (-) circuit is open or shorted
 
VSS (Magnetic) is damaged or has failed
 
PCM has failed
 

Trouble Code: P0506



Idle Speed Lower Than Expected

Possible Causes:



ISC motor "open" circuit is open or shorted to ground
 
ISC motor "close" circuit is open or shorted to ground
 
ISC motor is damaged or has failed
 
PCM is damaged
 

Trouble Code: P0507



Idle Speed Higher Than Expected

Possible Causes:



ISC motor control circuit(s) open or shorted to ground
 
ISC motor is damaged or has failed
 
PCM is damaged
 

Trouble Code: P0532



A/C Refrigerant Pressure Sensor -A- Circuit Low Input

Possible Causes:



Poor connection
 
Open in power circuit
 
Open or short to ground in signal circuit
 
Faulty A/C pressure sensor
 
Faulty PCM
 

Trouble Code: P0533



A/C Refrigerant Pressure Sensor -A- Circuit High Input

Possible Causes:



Poor connection
 
Open in signal circuit open
 
Open in ground circuit
 
Faulty A/C pressure sensor
 
Faulty PCM
 

Trouble Code: P0562



System Voltage Low Input

Possible Causes:



Ignition system voltage circuit is open
 
Generator is damaged or has failed (generator output too low)
 
PCM has failed
 

Trouble Code: P0563



System Voltage High Input

Possible Causes:



Generator is damaged or has failed (generator output to high)
 
PCM has failed
 

Trouble Code: P0601



PCM (Internal Controller) Checksum Error

Possible Causes:



Clear the trouble codes and retest for this trouble code. If the same trouble code resets, the PCM has failed and must be replaced to repair this problem.
 

Trouble Code: P0605



PCM (Internal Controller) ROM Error

Possible Causes:



Clear the trouble codes and retest for this trouble code. If the same trouble code resets, the PCM has failed and must be replaced to repair this problem.
 

Trouble Code: P0645



A/C Clutch Relay Control Circuit

Possible Causes:



Open in battery and control circuit
 
Short to ground in control circuit
 
Short to battery in control circuit
 
Faulty A/C relay
 
Faulty PCM
 

Trouble Code: P0646



A/C Clutch Relay Control Circuit Low

Possible Causes:



Poor connection
 
Open or short to ground in A/C relay circuit
 
Faulty A/C relay
 
Faulty PCM
 

Trouble Code: P0647



A/C Clutch Relay Control Circuit High

Possible Causes:



Poor connection
 
Short to power in A/C relay circuit
 
Faulty A/C relay
 
Faulty PCM
 

Trouble Code: P0650



Malfunction Indicator Lamp (MIL) Control Circuit

Possible Causes:



Open or short between MIL and PCM
 
Contact resistance in connectors
 
Burned out MIL bulb
 

Trouble Code: P0700



Transmission Control System Signal

Possible Causes:



Clear the trouble codes and retest for this trouble code. If the same trouble code resets, the TCM may have failed.
 

Trouble Code: P0707



Transmission Range Switch Circuit Malfunction (Open)

Possible Causes:



TR sensor signal circuit is open between the switch and PCM
 
TR sensor is damaged or has failed
 
TCM has failed
 
TSB 01-40-020 (7/01) contains information about this code
 

Trouble Code: P0708



Transmission Range Switch Circuit Malfunction (Shorted)

Possible Causes:



TR sensor signal circuit is shorted to ground
 
TR sensor is damaged or has failed
 
TCM has failed
 
TSB 01-40-020 (7/01) contains information about this code
 

Trouble Code: P0711



Transaxle Fluid Temperature Sensor Rationality

Possible Causes:



Sensor signal circuit is short to ground
 
Faulty sensor
 
Faulty PCM
 

Trouble Code: P0712



Transmission Fluid Temperature Sensor Circuit High Input

Possible Causes:



TFT sensor signal circuit is open between sensor and PCM
 
TFT sensor ground circuit is open between sensor and PCM
 
TFT sensor is damaged or has failed
 
PCM has failed
 
TSB 00-40-10 (8/00) contains information about this code
 

Trouble Code: P0713



Transmission Fluid Temperature Sensor Circuit Low Input

Possible Causes:



TFT sensor signal circuit is shorted to ground
 
TFT sensor is damaged or has failed
 
PCM has failed
 
TSB 00-40-10 (8/00) contains information about this code
 

Trouble Code: P0716



Input Speed Sensor Signal Rationality

Possible Causes:



Faulty INPUT SPEED SENSOR
 
Faulty PCM
 
 

Trouble Code: P0717



A/T Pulse Generator 'A' Sensor Circuit Malfunction

Possible Causes:



A/T pulse generator 'A' (+) circuit is open or shorted to ground
 
A/T pulse generator 'A' (-) circuit is open or shorted to ground
 
A/T pulse generator 'B' is damaged or has failed
 
TCM has failed
 
TSB 01-40-006-1 (12/01) contains information about this code
 

Trouble Code: P0722



A/T Pulse Generator 'B' Sensor Circuit Malfunction

Possible Causes:



Pulse generator 'B' (+) or (-) circuit is open or shorted to ground
 
Pulse generator 'B' is damaged or has failed
 
TCM has failed
 
TSB 01-40-006-1 (12/01) contains information about this code
 

Trouble Code: P0731



A/T Incorrect 1st Gear Ratio

Possible Causes:



Solenoid or related pressure switch is damaged or has failed
 
Problems related to the Input Speed or Output Speed sensor
 
Low/Reverse clutch is damaged, leaking or has failed
 
Problems related to the transmission valve body
 

Trouble Code: P0732



A/T Incorrect 2nd Gear Ratio

Possible Causes:



Solenoid or related pressure switch is damaged or has failed
 
Problems related to the Input Speed or Output Speed sensor
 
Low/Reverse clutch is damaged, leaking or has failed
 
Problems related to the transmission valve body
 

Trouble Code: P0733



A/T Incorrect 3rd Gear Ratio

Possible Causes:



Solenoid or related pressure switch is damaged or has failed
 
Problems related to the Input Speed or Output Speed sensor
 
Low/Reverse clutch is damaged, leaking or has failed
 
Problems related to the transmission valve body
 

 
label.common.footer.alt.autozoneLogo