Hyundai Cars 2006-2008

2.0L L4 VIN D Auto 9

Print

Trouble Code: P0452



EVAP Pressure Sensor Circuit Low Input

Possible Causes:



Pressure sensor signal circuit is shorted to ground
 
Pressure sensor power (VREF) circuit is open
 
Pressure sensor is damaged or has failed
 
PCM has failed
 

Trouble Code: P0453



EVAP Pressure Sensor Circuit High Input

Possible Causes:



Pressure sensor signal circuit is shorted to power
 
Pressure sensor ground circuit open between sensor and PCM
 
Pressure sensor is damaged or has failed
 
PCM has failed
 

Trouble Code: P0454



EVAP Emission System- Pressure Sensor Intermittent

Possible Causes:



Contact resistance in connectors
 
Faulty FTPS
 

Trouble Code: P0455



EVAP System Large Leak (0.080") Detected

Possible Causes:



Canister vent (CV) solenoid may be stuck in open position
 
EVAP canister tube, EVAP canister purge outlet tube or EVAP return tube disconnected or cracked, or canister is damaged
 
EVAP canister purge valve stuck closed, or canister damaged
 
Fuel filler cap missing, loose (not tightened) or the wrong part
 
Fuel vapor hoses/tubes blocked or restricted, or fuel vapor control valve tube or fuel vapor vent valve assembly blocked
 
Fuel tank pressure (FTP) sensor has failed (mechanical fault)
 
Fuel tank control valve is contaminated, damaged or has failed
 

Trouble Code: P0456



EVAP Emission System- Leak Detected (Very Small)

Possible Causes:



Leakage in EVAP system line
 
Faulty CCV, PCSV or FTPS
 

Trouble Code: P0457



EVAP System Leak (Fuel Tank Cap) Detected

Possible Causes:



Canister vent (CV) solenoid may be stuck in open position
 
EVAP canister tube, EVAP canister purge outlet tube or EVAP return tube disconnected or cracked, or canister is damaged
 
Fuel filler cap missing, loose (not tightened) or the wrong part
 
Fuel tank pressure (FTP) sensor has failed (mechanical fault)
 
Fuel tank control valve is contaminated, damaged or has failed
 

Trouble Code: P0501



Vehicle Speed Sensor Circuit Range/Performance

Possible Causes:



VSS signal circuit from the sensor to the I/P Cluster to the PCM is open, shorted to ground or to system power
 
VSS (Magnetic) signal (+) or (-) circuit is open or shorted
 
VSS (Magnetic) is damaged or has failed
 
PCM has failed
 

Trouble Code: P0505



Idle Speed Control System (Mechanical) Fault

Possible Causes:



Stepper motor Coil A1 or A2 circuit is open or shorted to ground
 
Stepper motor Coil B1 or B2 circuit is open or shorted to ground
 
Stepper motor coil circuit(s) shorted to system power (B+)
 
Stepper motor power circuit is open (check power at MFI relay)
 
Stepper motor is damaged or has failed
 
PCM has failed
 

Trouble Code: P0506



Idle Speed Lower Than Expected

Possible Causes:



ISC motor "open" circuit is open or shorted to ground
 
ISC motor "close" circuit is open or shorted to ground
 
ISC motor is damaged or has failed
 
PCM is damaged
 

Trouble Code: P0507



Idle Speed Higher Than Expected

Possible Causes:



ISC motor control circuit(s) open or shorted to ground
 
ISC motor is damaged or has failed
 
PCM is damaged
 

Trouble Code: P0560



Battery Backup Line Circuit Malfunction

Possible Causes:



Battery backup circuit to the PCM is open
 
Battery backup fuse to the PCM is open or missing
 
Battery backup circuit to the PCM has high resistance
 
PCM has failed
 

Trouble Code: P0562



System Voltage Low Input

Possible Causes:



Ignition system voltage circuit is open
 
Generator is damaged or has failed (generator output too low)
 
PCM has failed
 

Trouble Code: P0563



System Voltage High Input

Possible Causes:



Generator is damaged or has failed (generator output to high)
 
PCM has failed
 

Trouble Code: P0600



CAN Communication Bus

Possible Causes:



Open or short in CAN line
 
Contact resistance in connectors
 
Faulty PCM
 

Trouble Code: P0601



PCM (Internal Controller) Checksum Error

Possible Causes:



Clear the trouble codes and retest for this trouble code. If the same trouble code resets, the PCM has failed and must be replaced to repair this problem.
 

Trouble Code: P0605



PCM (Internal Controller) ROM Error

Possible Causes:



Clear the trouble codes and retest for this trouble code. If the same trouble code resets, the PCM has failed and must be replaced to repair this problem.
 

Trouble Code: P0606



ECM Processor (ECU-Self Test Failed)

Possible Causes:



Faulty PCM
 

Trouble Code: P0625



Alternator Field -F- Terminal Circuit Low

Possible Causes:



Short to battery in harness
 
Poor connection or damaged harness
 

Trouble Code: P0626



Alternator Field -F- Terminal Circuit High

Possible Causes:



Open or short to ground in harness
 
Faulty charging system
 

Trouble Code: P0630



VIN Not Programmed Or Incompatible- ECM/PCMECM

Possible Causes:



PCM is new and has not yet been programmed
 

Trouble Code: P0645



A/C Clutch Relay Control Circuit

Possible Causes:



Open in battery and control circuit
 
Short to ground in control circuit
 
Short to battery in control circuit
 
Faulty A/C relay
 
Faulty PCM
 

Trouble Code: P0650



Malfunction Indicator Lamp (MIL) Control Circuit

Possible Causes:



Open or short between MIL and PCM
 
Contact resistance in connectors
 
Burned out MIL bulb
 

Trouble Code: P0700



Transmission Control System Signal

Possible Causes:



Clear the trouble codes and retest for this trouble code. If the same trouble code resets, the TCM may have failed.
 

Trouble Code: P0707



Transmission Range Switch Circuit Malfunction (Open)

Possible Causes:



TR sensor signal circuit is open between the switch and PCM
 
TR sensor is damaged or has failed
 
TCM has failed
 
TSB 01-40-020 (7/01) contains information about this code
 

Trouble Code: P0708



Transmission Range Switch Circuit Malfunction (Shorted)

Possible Causes:



TR sensor signal circuit is shorted to ground
 
TR sensor is damaged or has failed
 
TCM has failed
 
TSB 01-40-020 (7/01) contains information about this code
 

Trouble Code: P0711



Transaxle Fluid Temperature Sensor Rationality

Possible Causes:



Sensor signal circuit is short to ground
 
Faulty sensor
 
Faulty PCM
 

Trouble Code: P0712



Transmission Fluid Temperature Sensor Circuit High Input

Possible Causes:



TFT sensor signal circuit is open between sensor and PCM
 
TFT sensor ground circuit is open between sensor and PCM
 
TFT sensor is damaged or has failed
 
PCM has failed
 
TSB 00-40-10 (8/00) contains information about this code
 

Trouble Code: P0712



Transmission Fluid Temperature Low Input

Possible Causes:



TFT sensor signal circuit shorted to ground (sensor to TCM)
 
TFT sensor signal circuit shorted to ground (TCM to PCM)
 
TFT sensor is damaged or has failed
 
PCM is damaged
 

Trouble Code: P0713



Transmission Fluid Temperature High Input

Possible Causes:



TFT sensor signal circuit is open (sensor circuit to the TCM)
 
TFT sensor signal circuit is open (TCM circuit to the PCM)
 
TFT sensor is damaged or has failed
 
PCM is damaged
 

Trouble Code: P0715



Transmission Input Speed Shaft Sensor

Possible Causes:



Input speed sensor signal circuit is open or shorted to ground
 
Input speed sensor is damaged or has failed
 
TCM has failed
 
TSB 1-40-005 (3/01) contains information about this code
 

Trouble Code: P0717



A/T Pulse Generator 'A' Sensor Circuit Malfunction

Possible Causes:



A/T pulse generator 'A' (+) circuit is open or shorted to ground
 
A/T pulse generator 'A' (-) circuit is open or shorted to ground
 
A/T pulse generator 'B' is damaged or has failed
 
TCM has failed
 
TSB 01-40-006-1 (12/01) contains information about this code
 

Trouble Code: P0720



Transmission Output Speed Shaft Sensor

Possible Causes:



Output speed sensor signal circuit is open or shorted to ground
 
Output speed sensor is damaged or has failed
 
TCM has failed
 
TSB 1-40-005 (3/01) contains information about this code
 

Trouble Code: P0721



Output Speed Sensor Range/Performance

Possible Causes:



Signal circuit is open or short
 
Sensor power circuit is open
 
Sensor ground circuit is open
 
Faulty OUTPUT SPEED SENSOR
 
Faulty PCM
 

Trouble Code: P0722



Output Shaft Speed Sensor No Signal

Possible Causes:



OUTPUT SHAFT SPEED SENSOR SIGNAL CIRCUIT OPEN OR SHORTED
 
OUTPUT SHAFT SPEED SENSOR IS DAMAGED OR HAS FAILED
 
PCM HAS FAILED
 

Trouble Code: P0731



A/T Incorrect 1st Gear Ratio

Possible Causes:



Solenoid or related pressure switch is damaged or has failed
 
Problems related to the Input Speed or Output Speed sensor
 
Low/Reverse clutch is damaged, leaking or has failed
 
Problems related to the transmission valve body
 

Trouble Code: P0732



A/T Incorrect 2nd Gear Ratio

Possible Causes:



Solenoid or related pressure switch is damaged or has failed
 
Problems related to the Input Speed or Output Speed sensor
 
Low/Reverse clutch is damaged, leaking or has failed
 
Problems related to the transmission valve body
 

Trouble Code: P0733



A/T Incorrect 3rd Gear Ratio

Possible Causes:



Solenoid or related pressure switch is damaged or has failed
 
Problems related to the Input Speed or Output Speed sensor
 
Low/Reverse clutch is damaged, leaking or has failed
 
Problems related to the transmission valve body
 

Trouble Code: P0734



A/T Incorrect 4th Gear Ratio

Possible Causes:



Solenoid or related pressure switch is damaged or has failed
 
Low/Reverse clutch is damaged, leaking or has failed
 
Problems related to the Input Speed or Output Speed sensor
 
Problems related to the transmission valve body
 

Trouble Code: P0736



A/T Incorrect Reverse Gear Ratio

Possible Causes:



Reverse Gear is damaged or has failed
 
Low/Reverse clutch is damaged, leaking or has failed
 
Problems related to the Input Speed or Output Speed sensor
 
Problems related to the transmission valve body
 

Trouble Code: P0741



Torque Converter Clutch Stuck Off

Possible Causes:



 
- TORQUE CONVERTER(DAMPER) CLUTCH : TCC
 
Faulty TCC or oil pressure system
 
Faulty TCC solenoid valve
 
Faulty body control valve
 
Faulty PCM/TCM
 
 

 
label.common.footer.alt.autozoneLogo