Hyundai Cars 2006-2008

Accessory Drive Belts

Print

Adjustment



Specific to:

Hyundai Accent 2006-2008

Hyundai Azera 2006-2008

Hyundai Elantra 2006-2008

Hyundai Entourage 2007-2008

Hyundai Sonata 2006-2008

Hyundai Tiburon 2006-2008

  1. Loosen the tension mounting bolt.
  2.  
  3. Turn the adjusting bolt to obtain the proper belt tension, then retighten the mounting bolt.
  4.  
  5. Recheck the deflection of the drive belt.
  6.  

Belt Routings



Specific to:

Hyundai Entourage 2007-2008

Refer to the accompanying illustration for accessory belt routing.

Click image to see an enlarged view

Fig. Accessory drive belt routing-3.8L engine

Specific to:

Hyundai Accent 2006-2008

Hyundai Azera 2006-2008

Hyundai Elantra 2006-2008

Hyundai Sonata 2006-2008

Hyundai Tiburon 2006-2008



Click image to see an enlarged view

Fig. Accessory drive belt routing-1.6L engine



Click image to see an enlarged view

Fig. Accessory drive belt routing-2.0L engine



Click image to see an enlarged view

Fig. Accessory drive belt routing-2.4L engine



Click image to see an enlarged view

Fig. Accessory drive belt routing-2.7L engine



Click image to see an enlarged view

Fig. Accessory drive belt routing-3.3L and 3.8L engines

Inspection



Specific to:

Hyundai Accent 2006-2008

Hyundai Azera 2006-2008

Hyundai Elantra 2006-2008

Hyundai Entourage 2007-2008

Hyundai Sonata 2006-2008

Hyundai Tiburon 2006-2008

Inspect the accessory drive belt for signs of glazing or cracking. A glazed belt will be perfectly smooth from slippage, while a good belt will have a slight texture of fabric visible. Cracks will usually start at the inner edge of the belt and run outward. All worn or damaged accessory drive belts should be replaced immediately.

Removal & Installation



Specific to:

Hyundai Accent 2006-2008

Hyundai Azera 2006-2008

Hyundai Elantra 2006-2008

Hyundai Entourage 2007-2008

Hyundai Sonata 2006-2008

Hyundai Tiburon 2006-2008

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Raise and support the vehicle.
  4.  
  5. Remove the engine splash shield.
  6.  
  7. Rotate the drive belt tensioner clockwise to release the drive belt tension.
  8.  
  9. Remove the drive belt from the alternator.
  10.  
  11. Slowly release the drive belt tensioner.
  12.  
  13. Remove the drive belt from the accessory drive pulleys.
  14.  

To install:

  1. Install the drive belt to the accessory drive pulley.
  2.  
  3. Rotate the drive belt tensioner clockwise.
  4.  
  5. Install the drive belt to the alternator.
  6.  
  7. Ensure the drive belt is properly aligned and seated into the grooves of the accessory drive pulleys.
  8.  
  9. Slowly release the drive belt tensioner.
  10.  
  11. Install the engine splash shield.
  12.  
  13. Lower the vehicle.
  14.  

 
label.common.footer.alt.autozoneLogo