Hyundai Cars 2006-2008

Throttle Body

Print

Removal & Installation



Specific to:

Hyundai Entourage 2007-2008

The throttle body may also be referred to as the Electronic Throttle Control (ETC) module.

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Turn the ignition OFF.
  4.  
  5. Remove the engine cover.
  6.  
  7. Remove the throttle body electrical connector.
  8.  
  9. Remove the throttle body bolts.
  10.  
  11. Remove the throttle body and gasket.

    Click image to see an enlarged view

    Fig. Location of the MAP sensor, Purge Control Solenoid Valve (PCSV), and the Electronic Throttle Control (ETC) module



    Click image to see an enlarged view

    Fig. Exploded view of the Electronic Throttle Control (ETC) module

  12.  

To install:

  1. Clean the throttle body gasket mating surfaces.
  2.  
  3. Install the throttle body and NEW gasket.
  4.  
  5. Install the throttle body bolts and tighten to 21 ft. lbs. (28 Nm).
  6.  
  7. Install the throttle body electrical connector.
  8.  
  9. Install the engine cover.
  10.  

Specific to:

Hyundai Accent 2006-2008

Hyundai Azera 2006-2008

Hyundai Elantra 2006-2008

Hyundai Sonata 2006-2008

Hyundai Tiburon 2006-2008

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Turn the ignition OFF .
  4.  
  5. Remove the engine cover.
  6.  
  7. Remove the throttle body electrical connector.
  8.  
  9. Remove the throttle body bolts.
  10.  
  11. Remove the throttle body and gasket.
  12.  

To install:

  1. Clean the throttle body gasket mating surfaces.
  2.  
  3. Install the throttle body and NEW gasket.
  4.  
  5. Install the throttle body bolts and tighten to 21 ft. lbs. (28 Nm).
  6.  
  7. Install the throttle body electrical connector.
  8.  
  9. Install the engine cover.
  10.  

 
label.common.footer.alt.autozoneLogo