Hyundai Cars 2006-2008

Ignition Switch

Print

Removal & Installation



Specific to:

Hyundai Entourage 2007-2008

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Disconnect the negative (-) battery terminal.
  4.  
  5. Remove the crash pad lower panel (A).

    Click image to see an enlarged view

    Fig. Remove the crash pad lower panel (A)

  6.  
  7. Remove the 2 screws (A) and the trip switch connector.
  8.  
  9. Remove the crash fascia panel (B).

    Click image to see an enlarged view

    Fig. Remove the crash fascia panel (B)

  10.  
  11. Remove the screw with the ignition in the ON position (IG ON) and disconnect the 6P connector.
  12.  
  13. Remove the ignition switch (A).
  14.  
  15. Installation is the reverse of removal procedure.

    Click image to see an enlarged view

    Fig. Remove the ignition switch (A)

  16.  

Specific to:

Hyundai Accent 2006-2008

Hyundai Azera 2006-2008

Hyundai Elantra 2006-2008

Hyundai Sonata 2006-2008

Hyundai Tiburon 2006-2008

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove or disconnect the following:

    The negative battery terminal
     
    The crash pad lower panel
     
    The ignition switch after loosening the screw with IG ON and disconnecting the 6P connector
     

  4.  
  5. Installation is the reverse of the removal procedure.
  6.  

 
label.common.footer.alt.autozoneLogo