Hyundai Cars 2006-2008

Exterior 1

Print

Back-up, Brake, Marker, Signal, & Tail Lights



Removal & Installation
Tail Lights

Specific to:

Hyundai Entourage 2007-2008

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Disconnect the negative (-) battery terminal.
  4.  
  5. Remove the 3 mounting screws and the electrical connector.
  6.  
  7. Remove the taillight lamp assembly (A).
  8.  
  9. Remove the socket(s) in a counterclockwise direction and replace the bulb(s).
  10.  
  11. Installation is the reverse of the removal procedure.

    Click image to see an enlarged view

    Fig. Remove the taillight lamp assembly (A)



    Click image to see an enlarged view

    Fig. Remove the socket(s) in a counterclockwise direction and replace the bulb(s)



    Click image to see an enlarged view

    Fig. Lighting system component locations

  12.  

Specific to:

Hyundai Accent 2006-2008

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Disconnect the negative battery terminal.
  4.  
  5. Remove the nuts holding the rear combination lamp.
  6.  
  7. Disconnect the 6P connector.
  8.  
  9. Remove the rear combination lamp.
  10.  
  11. Replace the taillight bulbs as needed.

    Click image to see an enlarged view

    Fig. Remove the nuts holding the rear combination lamp-Accent

  12.  

To install:

  1. Installation is the reverse of removal.

    Click image to see an enlarged view

    Fig. Location of lighting system components-Accent

  2.  

Specific to:

Hyundai Azera 2006-2008

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Disconnect the negative battery terminal.
  4.  
  5. Remove the nuts holding the rear combination lamp.
  6.  
  7. Disconnect the 4P connector (A).

    Click image to see an enlarged view

    Fig. Remove the nuts holding the rear combination lamp-Azera

  8.  
  9. Remove the outside rear combination lamp.
  10.  
  11. Replace the taillight bulbs or taillight assembly as necessary.
  12.  
  13. Remove the nuts holding the rear inner combination lamp.
  14.  
  15. Disconnect the 4P connector then remove the inner rear combination lamp.
  16.  
  17. Remove the 4 nuts and remove the rear garnish.
  18.  
  19. Remove inner lamp assembly.
  20.  
  21. Replace the taillight bulbs or taillight assembly as necessary.
  22.  

To install:

  1. Installation is the reverse of removal.

    Click image to see an enlarged view

    Fig. Location of lighting system components-Azera

  2.  

Specific to:

Hyundai Elantra 2006-2008

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Disconnect the negative battery terminal.
  4.  
  5. Remove the 3 nuts holding the rear combination lamp.
  6.  
  7. Disconnect the 4P connector.

    Click image to see an enlarged view

    Fig. Remove the nuts holding the rear combination lamp-Elantra

  8.  
  9. Remove the outside rear combination lamp.
  10.  
  11. Replace the bulbs after disconnecting the rear combination lamp assembly.

    Click image to see an enlarged view

    Fig. Replace the bulbs of the rear combination lamp assembly-Elantra

  12.  
  13. Disconnect the lamp cover on the trunk.
  14.  
  15. Remove the lamp assembly after loosening the 4-pin connector, the cap nuts, and the 2 bolts.
  16.  
  17. Remove the trunk combination lamp assembly and replace the bulb.

    Click image to see an enlarged view

    Fig. Remove the trunk combination lamp assembly and replace the bulb-Elantra

  18.  

To install:

  1. Install the trunk combination lamp assembly after assembling the bulb.
  2.  
  3. Install the lamp cover to the trunk after connecting the lamp connector.
  4.  
  5. Install the rear combination lamp assembly after assembling the bulbs and connecting the lamp connector.
  6.  
  7. Connect the negative battery terminal.

    Click image to see an enlarged view

    Fig. Location of lighting system components-Elantra

  8.  

Specific to:

Hyundai Tiburon 2006-2008

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Disconnect the negative battery terminal.
  4.  
  5. Remove the rear woofer speaker panel (A).

    Click image to see an enlarged view

    Fig. Remove the rear woofer speaker panel (A)-Tiburon

  6.  
  7. Remove the 3 nuts holding the rear combination lamp.
  8.  
  9. Disconnect the connector then remove the rear combination lamp assembly (A).

    Click image to see an enlarged view

    Fig. Remove the rear combination lamp assembly (A)-Tiburon

  10.  
  11. Replace the bulbs by turning in a counterclockwise direction.

    Click image to see an enlarged view

    Fig. Replace the bulbs of the combination lamp assembly as illustrated-Tiburon

  12.  

To install:

  1. Installation is the reverse of removal.
  2.  

 
label.common.footer.alt.autozoneLogo