Hyundai Cars 2006-2008

Exterior 2

Print

Headlights



Specific to:

Hyundai Entourage 2007-2008


WARNING
Because the halogen bulb operates at a high temperature, dirt and oil on the bulb surface reduces the bulb-s service life. Hold the flange portion when replacing the bulb. Never touch the glass portion unless using a clean shop towel is used. Do not leave the headlight assembly without a bulb for an extended period of time. Dust, moisture, and contaminants may enter the headlight assembly affecting its performance.

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Disconnect the negative (-) battery terminal.
  4.  
  5. Remove the 2 mounting bolts.
  6.  
  7. Remove the headlight assembly after disconnecting the bulb connectors.
    WARNING
    Take care so that the holding clips (A) are not damaged.



    Click image to see an enlarged view

    Fig. Remove the 2 mounting bolts and remove the headlight assembly after disconnecting the bulb connectors



    Click image to see an enlarged view

    Fig. Take care so that the holding clips (A) are not damaged

  8.  
  9. Remove the headlight rear cover(s).
  10.  
  11. Replace the bulb(s).
  12.  
  13. Installation is the reverse of the removal procedure.

    Click image to see an enlarged view

    Fig. Headlight rear cover removal for bulb replacement



    Click image to see an enlarged view

    Fig. Lighting system component locations

  14.  

Specific to:

Hyundai Accent 2006-2008


WARNING
Because the halogen bulb operates at a high temperature, dirt and oil on the bulb surface reduces the bulb-s service life. Hold the flange portion when replacing the bulb. Never touch the glass portion unless using a clean shop towel is used. Do not leave the headlight assembly without a bulb for an extended period of time. Dust, moisture, and contaminants may enter the headlight assembly affecting its performance.

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Disconnect the negative battery terminal.
  4.  
  5. Remove the radiator grill by loosening the bolts and clips.
  6.  
  7. Remove the 2 mounting bolts of the headlight assembly.

    Click image to see an enlarged view

    Fig. Remove the 2 mounting bolts of the headlight assembly-Accent

  8.  
  9. Disconnect the headlight connectors.
  10.  
  11. Remove the headlight assembly.
    WARNING
    Take care that the holding clip (A) is not damaged.

  12.  
  13. Replace the faulty headlight bulb(s) or the headlight assembly if it is damaged.

    Click image to see an enlarged view

    Fig. Take care that the holding clip (A) is not damaged-Accent

  14.  

To install:

  1. Installation is the reverse of removal.

    Click image to see an enlarged view

    Fig. Location of lighting system components-Accent

  2.  

Specific to:

Hyundai Azera 2006-2008


WARNING
Because the halogen bulb operates at a high temperature, dirt and oil on the bulb surface reduces the bulb-s service life. Hold the flange portion when replacing the bulb. Never touch the glass portion unless using a clean shop towel is used. Do not leave the headlight assembly without a bulb for an extended period of time. Dust, moisture, and contaminants may enter the headlight assembly affecting its performance.

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Disconnect the negative battery terminal.
  4.  
  5. Remove the 2 mounting bolts and 1 nut of the headlight assembly (A).

    Click image to see an enlarged view

    Fig. Remove the 2 mounting bolts and 1 nut of the headlight assembly (A)-Azera

  6.  
  7. Disconnect the lamp connectors.
  8.  
  9. Remove the headlight assembly.
    WARNING
    Take care that retaining clip (A) is not damaged.



    Click image to see an enlarged view

    Fig. Take care that retaining clip (A) is not damaged-Azera

  10.  
  11. To replace the headlight bulb:
    1. Remove the dust cover.
    2.  
    3. Remove the igniter after disconnecting the connector (A).

      Click image to see an enlarged view

      Fig. Remove the igniter after disconnecting the connector (A)-Azera

    4.  

  12.  
  13. Remove fixing spring and replace the bulb.
  14.  

To install:

  1. Installation is the reverse of removal.
  2.  
  3. Confirm the bulb(s) locks into place.

    Click image to see an enlarged view

    Fig. Location of lighting system components-Azera

  4.  

Specific to:

Hyundai Elantra 2006-2008


WARNING
Because the halogen bulb operates at a high temperature, dirt and oil on the bulb surface reduces the bulb-s service life. Hold the flange portion when replacing the bulb. Never touch the glass portion unless using a clean shop towel is used. Do not leave the headlight assembly without a bulb for an extended period of time. Dust, moisture, and contaminants may enter the headlight assembly affecting its performance.

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Disconnect the negative battery terminal.
  4.  
  5. Remove the 2 mounting bolts of headlight assembly.
  6.  
  7. Remove the headlight assembly (A) after disconnecting the bulb connectors.
    WARNING
    Take care that the retaining clip (A) is not damaged.



    Click image to see an enlarged view

    Fig. Remove the 2 mounting bolts and the headlight assembly-Elantra



    Click image to see an enlarged view

    Fig. Take care that the retaining clip (A) is not damaged-Elantra

  8.  
  9. Remove the bulb caps from the headlight assembly.

    Click image to see an enlarged view

    Fig. Remove the bulb caps from the headlight assembly-Elantra

  10.  
  11. Remove the head lamp bulbs.
  12.  

To install:

  1. Install the headlight bulb(s).
  2.  
  3. Install the headlight bulb caps.
  4.  
  5. Install the headlight assembly in reverse order of removal.

    Click image to see an enlarged view

    Fig. Location of lighting system components-Elantra

  6.  

Specific to:

Hyundai Tiburon 2006-2008


WARNING
Because the halogen bulb operates at a high temperature, dirt and oil on the bulb surface reduces the bulb-s service life. Hold the flange portion when replacing the bulb. Never touch the glass portion unless using a clean shop towel is used. Do not leave the headlight assembly without a bulb for an extended period of time. Dust, moisture, and contaminants may enter the headlight assembly affecting its performance.

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Disconnect the negative battery terminal.
  4.  
  5. Remove the front bumper upper cover (A).

    Click image to see an enlarged view

    Fig. Remove the front bumper upper cover (A)-Tiburon

  6.  
  7. Remove the 3 mounting bolts of headlight assembly.
  8.  
  9. Remove the headlight assembly (A).
    WARNING
    Take care that the retaining clip is not damaged.



    Click image to see an enlarged view

    Fig. Remove the 3 mounting bolts and the headlight assembly (A)-Tiburon

  10.  
  11. Disconnect the headlight connector.
  12.  
  13. Remove the headlight cap by turning in a counterclockwise direction.
  14.  
  15. Remove the headlight bulb(s).

    Click image to see an enlarged view

    Fig. Remove the headlight assembly caps to replace the bulbs-Tiburon

  16.  

To install:

  1. Installation is the reverse of removal.
  2.  

 
label.common.footer.alt.autozoneLogo