Hyundai Cars 2006-2008

Brake Disc (Rotor)

Print

Removal & Installation



Specific to:

Hyundai Entourage 2007-2008

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove the rear wheel.
  4.  
  5. Remove the caliper mounting bolts, then lift the caliper assembly away from the brake rotor.
  6.  
  7. Use a suitable piece of wire to suspend the caliper assembly. This will prevent the weight of the caliper from being supported by the brake flex hose which may damage the hose.
  8.  
  9. Once the caliper body and brake pads are removed, unfasten the caliper bracket mounting bolts.
  10.  
  11. Remove the bracket from the rotor.
  12.  
  13. Remove the rotor retaining screws.
  14.  
  15. Remove the brake rotor.
    1. If the brake rotor is seized due to corrosion or overheating, remove the brake rotor from the hub using an M8 screw (A).
    2.  
    3. Be careful not to use a hammer. The disc can be damaged if you remove the disc from the hub by hammering.

      Click image to see an enlarged view

      Fig. If the brake rotor is seized due to corrosion or overheating, remove the brake rotor from the hub using an M8 screw (A)

    4.  

  16.  

To install:

  1. Install or connect the following:

    Brake rotor
     
    Brake caliper. Refer to Brake Caliper, removal & installation
     
    Rear wheel
     

  2.  
  3. Pump the brake pedal until the brake pads are seated and a firm pedal is achieved before attempting to move the vehicle.
    CAUTION
    Do not move the vehicle until a firm pedal is obtained.

  4.  
  5. Road test the vehicle to check for proper brake operation.
  6.  

Specific to:

Hyundai Accent 2006-2008

Hyundai Azera 2006-2008

Hyundai Elantra 2006-2008

Hyundai Sonata 2006-2008

Hyundai Tiburon 2006-2008

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove or disconnect the following:

    Rear wheel
     
    Brake caliper. Refer to Brake Caliper, removal & installation
     
    Brake rotor
     

  4.  

To install:

  1. Install or connect the following:

    Brake rotor
     
    Brake caliper. Refer to Brake Caliper, removal & installation
     
    Rear wheel
     

  2.  

 
label.common.footer.alt.autozoneLogo