Hyundai Cars 2006-2008

Coil Springs

Print

Removal & Installation



Specific to:

Hyundai Entourage 2007-2008

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Raise and safely support the vehicle.
  4.  
  5. Remove the rear wheels and tires.
  6.  
  7. While supporting the lower arm with a jack, remove the lower arm bolt from the rear knuckle.
  8.  
  9. Loosen the lower arm bolt from the crossmember.
  10.  
  11. Remove the spring, lower seat, and the upper pad.

    Click image to see an enlarged view

    Fig. Rear suspension and related components

  12.  

To install:

  1. Installation is the reverse of the removal procedure.
  2.  
  3. Torque the lower arm mounting bolt to knuckle to 87-116 ft. lbs. (120-160 Nm).
  4.  
  5. Torque the lower arm to crossmember bolt to 145-195 ft. lbs. (200-270 Nm).
  6.  

Specific to:

Hyundai Accent 2006-2008

Hyundai Azera 2006-2008

Hyundai Elantra 2006-2008

Hyundai Sonata 2006-2008

Hyundai Tiburon 2006-2008

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Support the vehicle under the lower control arm.
  4.  
  5. Remove or disconnect the following:

    Rear wheel
     
    Flange nut and brake caliper assembly
     
    Parking brake assembly
     
    Wheel Speed Sensor (WSS) and the parking brake cable
     
    Rear shock assembly
     

  6.  
  7. Lower the jack assembly and remove the spring.
  8.  

To install:

  1. Install or connect the following:

    Spring and raise the jack into position
     
    Rear shock assembly
     
    Parking brake cable and WSS
     
    Parking brake assembly
     
    Flange nut and brake caliper assembly
     
    Rear wheel
     

  2.  

 
label.common.footer.alt.autozoneLogo