Hyundai Cars 2006-2008

Control Arms & Links

Print

Removal & Installation



Specific to:

Hyundai Entourage 2007-2008

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Raise and safely support the vehicle.
  4.  
  5. Remove the rear wheels and tires.
    WARNING
    Be careful not to damage the hub bolts when removing the rear wheel and tire.

  6.  
  7. Remove the left/right nuts (C) of the rear stabilizer control links (B) from the trailing arm (A).

    Click image to see an enlarged view

    Fig. Remove the left/right nuts (C) of the rear stabilizer control links (B) from the trailing arm (A)

  8.  
  9. Remove the rear stabilizer link (A) and nut (B) from the stabilizer bar assembly.
  10.  
  11. Remove the stabilizer control links from the vehicle.

    Click image to see an enlarged view

    Fig. Remove the rear stabilizer link (A) and nut (B) from the stabilizer bar assembly

  12.  

To install:

  1. Install the rear stabilizer control link (A) and nut (B) to the stabilizer bar assembly. Tightening torque: 36-47 ft. lbs. (50-65 Nm).
  2.  
  3. Install the stabilizer control link nut to the trailing arm. Tightening torque: 36-47 ft. lbs. (50-65 Nm).
  4.  
  5. Repeat appropriate steps for the other side.
  6.  
  7. Install the wheel and the tire to the rear hub. Tightening torque: 65-80 ft. lbs. (90-110 Nm).
    WARNING
    Be careful not to damage the hub bolts when installing the rear wheel and tire.

  8.  

Specific to:

Hyundai Azera 2006-2008

Hyundai Elantra 2006-2008

Hyundai Sonata 2006-2008

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove the rear wheel and tire.
    WARNING
    Be careful not to damage the hub bolts when removing the wheel and tire.

  4.  
  5. Remove the mounting nuts from the stabilizer bar control link.
  6.  
  7. Remove the stabilizer link.

    Click image to see an enlarged view

    Fig. Rear stabilizer bar control link and related rear suspension components-Azera and Sonata



    Click image to see an enlarged view

    Fig. Rear stabilizer bar control link and related rear suspension components-Elantra

  8.  

To install:

  1. Connect the rear stabilizer bar control link.
  2.  
  3. Install the stabilizer bar control link nuts and tighten to specification:
    1. Azera and Sonata: 25-33 ft. lbs. (35-45 Nm).
    2.  
    3. Elantra 33-40 ft. lbs. (45-55 Nm).
    4.  

  4.  
  5. Install the rear wheel and tire and tighten the wheel nuts to 65-80 ft. lbs. (90-110 Nm).
  6.  

Specific to:

Hyundai Tiburon 2006-2008

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove the mounting nuts from the rear stabilizer bar control link.
  4.  
  5. Remove the stabilizer bar control link from the rear strut assembly and the stabilizer bar.

    Click image to see an enlarged view

    Fig. Rear stabilizer bar control link and related rear suspension components-Tiburon

  6.  

To install:

  1. Install the mounting nuts on the stabilizer bar control link. Tighten to: 25-33 ft. lbs. (35-45 Nm).
  2.  
  3. Install the rear wheel and tire. Tighten the wheel nuts to: 65-80 ft. lbs. (90-110 Nm).
  4.  

 
label.common.footer.alt.autozoneLogo